NIC_NetCOPE
| Info | HW section | SW section | Addr space |
The NIC design is divided into the two parts: interface card part and mother card part. Both parts are based on the NetCOPE platform. The interface card part consists of the following components:
- Input GMII Buffer
- Output GMII Buffer
- Phyter I2C control
- GMII crossbar
- Aurora with flow control
- FL_WATCH component
- FrameLink Binder
The mother card part is based on the NetCOPE-Combo6x project. Currently there is available only SFPRO interface card design based on the NetCOPE-SFPRO project.
Only three additional components are used in the NetCOPE-Combo6x user accelerated core:
See the detailed NIC architecture on the following figure.
NIC architecture for Combo6x + SFPRO card combination
